Your location : Home > News > Industry information
Working principle of automatic steam liquid two-phase flow trap

Working principle of automatic steam liquid two-phase flow trap

The automatic steam liquid two-phase flow steam trap, also known as the gas-liquid two-phase flow control valve, is suitable for the water level self operated intelligent control of pressure vessels s...

2023-11-25
The functions of lubrication oil tank injector 1 # and injector 2 # for steam tu

The functions of lubrication oil tank injector 1 # and injector 2 # for steam tu

The oil injectors produced by Lianyungang Lingdong Electromechanical Equipment Co., Ltd. generally consist of nozzle filters, expansion pipes, inlet pipes, etc., and are installed on the main oil pump...

2023-11-25
The basic principle of lubricating oil system injectors

The basic principle of lubricating oil system injectors

The oil injector is composed of a nozzle, a filter screen, an expansion pipe, and an inlet pipe. In addition to supplying the inlet oil of the centrifugal main oil pump, it also supplies lubricating o...

2023-11-25
The principle of steam jet pump and steam injector

The principle of steam jet pump and steam injector

A steam injector is a device that is powered by steam and is needed in modern engineering. It does not require electricity, has no moving or rotating parts, is simple in system, and works reliably, so...

2023-11-25
Calculation of cooling area of sampling cooler

Calculation of cooling area of sampling cooler

Calculation of cooling area of sampling cooler 1: If the sample flow rate, cooling water temperature, and initial conditions of the sample are known, then the cooling surface required for the sampling...

2023-11-25
Fly ash sampler sampling

Fly ash sampler sampling

The sampling of fly ash sampler is selected on the flue between the outlet of the air preheater and the inlet of the dust collector. The specific installation location should generally meet the follow...

2023-11-25
Various forms of coal powder samplers

Various forms of coal powder samplers

The use of carbon steel material in coal powder samplers has caused many problems, and some manufacturers still encounter these problems when using coal powder samplers. So it is recommended to use st...

2023-11-25
Working status of oil injector and main oil pump

Working status of oil injector and main oil pump

The working status of the oil injector and main oil pump, the analysis of the reasons for the drop in the inlet oil pressure test of the main oil pump of a 200MW steam turbine, and the composition of ...

2023-11-25
Assembly and installation of oil injectors

Assembly and installation of oil injectors

The oil supply and lubrication oil injectors are completely identical in structure, mainly composed of orifice nozzles, diffusion tubes, sleeves, filters, etc.

2023-11-25
Installation and working engineering of coal powder sampler

Installation and working engineering of coal powder sampler

The installation and operation of the coal powder sampler and mobile coal powder sampler of Lianyungang Lingdong Electromechanical Equipment Co., Ltd. drill holes on the flue, extend the sampling tube...

2023-11-25

Industry information _Lianyungang Lingdong Electromechanical Equipment Co., Ltd厂家Copyright © 2012-2023 Lianyungang Lingdong Electromechanical Equipment Co., Ltd all rights reserved

Tel

0518-85370171